ファイル:BepiColombo spacecraft stack ESA380846.jpg

ページのコンテンツが他言語でサポートされていません。

元のファイル(4,102 × 2,969 ピクセル、ファイルサイズ: 2.61メガバイト、MIME タイプ: image/jpeg)

概要

解説
English: BepiColombo, a joint ESA and JAXA mission to Mercury, has completed its final tests in launch configuration, the last time it will be stacked like this before being reassembled at the launch site next year.

The image was taken on 6 July, during a dedicated press event where media were invited to see BepiColombo in ESA’s test centre. In the coming weeks, the three spacecraft elements will be separated for a final set of tests. The Mercury Transfer Module is seen at the bottom of the stack, with one folded solar array visible to the right. When both solar arrays are deployed they span about 30 m. The module will use solar-electric propulsion as well asgravity assists at Earth, Venus and Mercuryto carry two science orbiters to Mercury orbit. ESA’s Mercury Planetary Orbiter is seen in the middle of the stack (with the folded solar array towards the left and antenna to the right). JAXA’s Mercury Magnetospheric Orbiter sits at the top of the 6 m-high stack. During the cruise to Mercury it will be protected by the Magnetospheric Orbiter Sunshield and Interface Structure (MOSIF), which in this image is sitting on the floor to the right. After arriving at Mercury, the modules will separate, and from their respective orbits the science orbiters will make complementary measurements of Mercury’s interior, surface, exosphere and magnetosphere, following up on many of theopen questionsraised by NASA’sMessengermission. The final tests completed with BepiColombo in the launch configuration – also with the MOSIF in place – werevibration teststo simulate the shaking conditions at launch. In the coming weeks the assembly will be dismantled and the individual modules will undergo final checks following the vibration test, including solar array deployment tests. In addition, the transfer module will undergo a thermal vacuum test to simulate the extreme environmental conditions expected during the cruise. The spacecraft is scheduled to leave Europe in March, with a launch from Kourou, French Guiana, anticipated in October 2018, and arrival at Mercury at the end of 2025.

Seeherefor the latest status update, and ourvideo galleryfor examples of some of the recent tests.
日付
原典 http://www.esa.int/spaceinimages/Images/2017/07/BepiColombo_spacecraft_stack
作者 European Space Agency
許可
(ファイルの再利用)
ESA–C. Carreau,CC BY-SA 3.0 IGO
Title
InfoField
BepiColombo spacecraft stack
Set
InfoField
Space Science image of the week
Mission
InfoField
BepiColombo
Activity
InfoField
Space Science

ライセンス

w:ja:クリエイティブ・コモンズ
表示 継承
このファイルはクリエイティブ・コモンズ 表示-継承 3.0 IGO ライセンスのもとに利用を許諾されています。
帰属: ESA–C. Carreau
あなたは以下の条件に従う場合に限り、自由に
  • 共有 – 本作品を複製、頒布、展示、実演できます。
  • 再構成 – 二次的著作物を作成できます。
あなたの従うべき条件は以下の通りです。
  • 表示 – あなたは適切なクレジットを表示し、ライセンスへのリンクを提供し、変更があったらその旨を示さなければなりません。これらは合理的であればどのような方法で行っても構いませんが、許諾者があなたやあなたの利用行為を支持していると示唆するような方法は除きます。
  • 継承 – もしあなたがこの作品をリミックスしたり、改変したり、加工した場合には、あなたはあなたの貢献部分を元の作品とこれと同一または互換性があるライセンスの下に頒布しなければなりません。

キャプション

このファイルの内容を1行で記述してください

このファイルに描写されている項目

題材

10 7 2017

7d006bd5a87cc1c529d818075b430a0db4cd0c74

2,736,350 バイト

2,969 ピクセル

4,102 ピクセル

ファイルの履歴

過去の版のファイルを表示するには、その版の日時をクリックしてください。

日付と時刻サムネイル寸法利用者コメント
現在の版2017年7月10日 (月) 15:552017年7月10日 (月) 15:55時点における版のサムネイル4,102 × 2,969 (2.61メガバイト)European Space Agency, Id 380846, http://www.esa.int/spaceinimages/Images/2017/07/BepiColombo_spacecraft_stack, User:Fæ/Project_list/ESA

以下のページがこのファイルを使用しています:

メタデータ