ファイル:Ball and socket ground glass joints.svg

ページのコンテンツが他言語でサポートされていません。

元のファイル(SVG ファイル、425 × 105 ピクセル、ファイルサイズ: 1キロバイト)

概要

解説
English: Drawing of ground glass ball and socket joints used for making laboratory glassware. A ball (inner) joint is shown on the left side and a socket (outer) joint is shown on the right side. The ground glass surfaces are shown with gray shading. By putting them together in the direction of the arrows, they can be joined, usually with a little grease spread on the ground glass surfaces. They are typically held together by a clamp. The ball joint goes in the socket joint to join attached tubular sections of glass together. H Padleckas created this image file in April 2006 especially for use in the article "Laboratory glassware" in Wikimedia. H Padleckas 13:29, 27 May 2006 (UTC)
日付 27 May 2006 (original upload date), 2019-04-15 (vectorized)
原典 File:Ball_and_socket_ground_glass_joints.PNG, vectorized by GKFXtalk.
作者 H Padleckas, vectorized by GKFXtalk
許可
(ファイルの再利用)
この作品の著作権者である私は、この作品を以下のライセンスで提供します。
GNU head この文書は、フリーソフトウェア財団発行のGNUフリー文書利用許諾書 (GNU Free Documentation License) 1.2またはそれ以降のバージョンの規約に基づき、複製や再配布、改変が許可されます。不可変更部分、表紙、背表紙はありません。このライセンスの複製は、GNUフリー文書利用許諾書という章に含まれています。
w:ja:クリエイティブ・コモンズ
表示 継承
このファイルはクリエイティブ・コモンズ 表示-継承 3.0 非移植ライセンスのもとに利用を許諾されています。
あなたは以下の条件に従う場合に限り、自由に
  • 共有 – 本作品を複製、頒布、展示、実演できます。
  • 再構成 – 二次的著作物を作成できます。
あなたの従うべき条件は以下の通りです。
  • 表示 – あなたは適切なクレジットを表示し、ライセンスへのリンクを提供し、変更があったらその旨を示さなければなりません。これらは合理的であればどのような方法で行っても構いませんが、許諾者があなたやあなたの利用行為を支持していると示唆するような方法は除きます。
  • 継承 – もしあなたがこの作品をリミックスしたり、改変したり、加工した場合には、あなたはあなたの貢献部分を元の作品とこれと同一または互換性があるライセンスの下に頒布しなければなりません。
このライセンスのテンプレートは、GFDLのライセンス・アップデートによりこのファイルに追加されたものです。
あなたは上記のライセンスから、どれか一つ以上を選択できます。
その他のバージョン

キャプション

このファイルの内容を1行で記述してください

このファイルに描写されている項目

題材

023292913cbbd3b529c91928c37ad68a7b230850

1,434 バイト

105 ピクセル

425 ピクセル

ファイルの履歴

過去の版のファイルを表示するには、その版の日時をクリックしてください。

日付と時刻サムネイル寸法利用者コメント
現在の版2019年4月15日 (月) 12:412019年4月15日 (月) 12:41時点における版のサムネイル425 × 105 (1キロバイト)GKFX{{Information |description ={{en|1=Drawing of ground glass ball and socket joints used for making laboratory glassware. A ball (inner) joint is shown on the left side and a socket (outer) joint is shown on the right side. The ground glass surfaces are shown with gray shading. By putting them together in the direction of the arrows, they can be joined, usually with a little grease spread on the ground glass surfaces. They are typically held together by a clamp. The ball joint goes in the soc...

以下のページがこのファイルを使用しています:

グローバルなファイル使用状況

以下に挙げる他のウィキがこの画像を使っています:

メタデータ