Motorola S-Record形式のクイックリファレンスチャート。 （注意：レコードの例の画像では、単語「バイト」は文字を指定するために代わりに使用されている。）
|拡張子||.s19, .s28, .s37, .s, .s1, .s2, .s3, .sx, .srec, .mot, .mxt|
Motorola S-recordは、モトローラによって作成されたファイル形式であり、バイナリ情報をASCII 16進テキスト形式で伝達する。このファイル形式はSRECORD、SREC、S19、S28、S37とも呼ばれる。マイクロコントローラ、EPROM、EEPROM、およびその他の種類のプログラマブルロジックデバイスのフラッシュメモリのプログラミングによく使用される。典型的な適用では、コンパイラやアセンブラはプログラムのソースコード（C言語やアセンブリ言語など）を機械語コードに変換し、16進ファイルに出力する。16進ファイルは、プログラマーによってインポートされ、機械語コードを不揮発性メモリに書き込むか、ロードおよび実行のために対象システムに転送される。
The S-record format was created in the mid-1970s for the Motorola 6800 processor. Software development tools for that and other embedded processors would make executable code and data in the S-record format. PROM programmers would then read the S-record format and "burn" the data into the PROMs or EPROMs used in the embedded system.
There are other ASCII encoding with a similar purpose. BPNF, BHLF, and B10F were early binary formats, but they are neither compact nor flexible. Hexadecimal formats are more compact because they represent 4 bits rather than 1 bit per character. Many, such as S-record, are more flexible because they include address information so they can specify just a portion of a PROM. Intel HEX format was often used with Intel processors. Tek Hex is another hex format that can include a symbol table for debugging.
An SREC format file consists of a series of ASCII text records. The records have the following structure from left to right:
- Record type, two characters, an uppercase "S" (0x53) then a numeric digit 0 to 9, defining the type of record.
- Byte count, two hex digits, indicating the number of bytes (hex digit pairs) that follow in the rest of the record (address + data + checksum). This field has a minimum value of 3 for 16-bit address field plus 1 checksum byte, and a maximum value of 255 (0xFF).
- Address, four / six / eight hex digits as determined by the record type. The address bytes are arranged in big endian format.
- Data, a sequence of 2n hex digits, for n bytes of the data. For S1/S2/S3 records, a maximum of 32 bytes per record is typical since it will fit on an 80 character wide terminal screen, though 16 bytes would be easier to visually decode each byte at a specific address.
- Checksum, two hex digits, the least significant byte of ones' complement of the sum of the values represented by the two hex digit pairs for the byte count, address and data fields. See example section for a detailed checksum example.
SREC records are separated by one or more ASCII line termination characters so that each record appears alone on a text line. This enhances legibility by visually delimiting the records and it also provides padding between records that can be used to improve machine parsing efficiency.
Programs that create HEX records typically use line termination characters that conform to the conventions of their operating systems. For example, Linux programs use a single LF (line feed, hex value
0A) character to terminate lines, whereas Windows programs use a CR (carriage return, hex value
0D) followed by a LF.
The following table describes 10 possible S-records. S4 is reserved and not currently defined. S6 was originally reserved but was later redefined.
|This record contains vendor specific ASCII text represented as a series of hex digit pairs. It is common to see the data for this record in the format of a null-terminated string. The text data can be anything including a mixture of the following information: file/module name, version/revision number, date/time, product name, vendor name, memory designator on PCB, copyright notice. It is common to see: 48 44 52 which is the ASCII H, D, and R - "HDR".|
|This record contains data that starts at the 16-bit address field. This record is typically used for 8-bit microcontrollers, such as AVR, PIC, 8051, 68xx, 6502, 80xx, Z80. The number of bytes of data contained in this record is "Byte Count Field" minus 3 (that is, 2 bytes for "16-bit Address Field" and 1 byte for "Checksum Field").|
|This record contains data that starts at a 24-bit address. The number of bytes of data contained in this record is "Byte Count Field" minus 4 (that is, 3 bytes for "24-bit Address Field" and 1 byte for "Checksum Field").|
|This record contains data that starts at a 32-bit address. This record is typically used for 32-bit microcontrollers, such as ARM and 680x0. The number of bytes of data contained in this record is "Byte Count Field" minus 5 (that is, 4 bytes for "32-bit Address Field" and 1 byte for "Checksum Field").|
|S4||Reserved||N/A||N/A||This record is reserved.|
|This optional record contains a 16-bit count of S1 / S2 / S3 records. This record is used if the record count is less than or equal to 65,535 (0xFFFF), otherwise S6 record would be used.|
|This optional record contains a 24-bit count of S1 / S2 / S3 records. This record is used if the record count is less than or equal to 16,777,215 (0xFFFFFF). If less than 65,536 (0x010000), then S5 record would be used. NOTE: This newer record is the most recent change (it may not be official).|
|This record contains the starting execution location at a 32-bit address. This is used to terminate a series of S3 records. If a SREC file is only used to program a memory device and the execution location is ignored, then an address of zero could be used.|
|This record contains the starting execution location at a 24-bit address. This is used to terminate a series of S2 records. If a SREC file is only used to program a memory device and the execution location is ignored, then an address of zero could be used.|
|This record contains the starting execution location at a 16-bit address. This is used to terminate a series of S1 records. If a SREC file is only used to program a memory device and the execution location is ignored, then an address of zero could be used.|
Although some Unix documentation states "the order of S-records within a file is of no significance and no particular order may be assumed", in practice most software has ordered the SREC records. The typical record order starts with a (sometimes optional) S0 header record, continues with a sequence of one or more S1/S2/S3 data records, may have one optional S5/S6 count record, and ends with one appropriate S7/S8/S9 termination record.
- S19-style 16-bit address records
- S1 (one or more records)
- S5 (optional record)
- S28-style 24-bit address records
- S2 (one or more records)
- S5 (optional record)
- S37-style 32-bit address records
- S3 (one or more records)
- S5 (optional record)
Record length - Unix manual page documentation states, "An S-record file consists of a sequence of specially formatted ASCII character strings. An S-record will be less than or equal to 78 bytes in length." The manual page further limits the number of characters in the data field to 64 (or 32 data bytes). A record with an 8-hex-character address and 64 data characters would be 78 (2+2+8+64+2) characters long (this count ignores possible end-of-line or string termination characters). The file could be printed on an 80-character wide teleprinter. A note at the bottom of the manual page states, "This [manual page] is the only place that a 78-byte limit on total record length or 64-byte limit on data length is documented. These values shouldn't be trusted for the general case." If that limitation is ignored, the maximum length of an S-record is 514 characters: 2 for Record Type field + 2 for Byte Count field (whose value would be
0xFF=255) + 2*255 for Address, Data, and Checksum fields. Additional buffer space may be required for the line and string terminators. Using long line lengths has problems: "The Motorola S-record format definition permits up to 255 bytes of payload, or lines of 514 characters, plus the line termination. All EPROM programmers should have sufficiently large line buffers to cope with records this big. Few do."
Data field - Some documentation recommends a maximum of 32 bytes of data (64 hex characters) in this field. The minimum amount of data for S0/S1/S2/S3 records is zero. The maximum amount of data varies depending on the size of the address field. Since the Byte Count field can't be higher than 255 (0xFF), then the maximum number of bytes of data is calculated by 255 minus (1 byte for checksum field) minus (number of bytes in the address field). S0/S1 records support up to 252 bytes of data. S2 record supports up to 251 bytes of data. S3 record supports up to 250 bytes of data.
Comments - The SREC file format does not support comments. Some software ignores all text lines that do not start with "S" and ignores all text after the checksum field; that extra text is sometimes used (incompatibly) for comments. For example, the CCS PIC compiler supports placing a ";" comment line at the top or bottom of an Intel HEX file, and its manuals states "some programmers (MPLAB in particular) do not like comments at the top of the hex file", which is why the compiler has the option of placing the comment at the bottom of the hex file.
- Color legend
Record type Byte count Address Data Checksum
The following example record:
is decoded to show how the checksum value is calculated as follows:
- Add: add each byte 13 + 7A+F0 + 0A+0A+0D+00+00+00+00+00+00+00+00+00+00+00+00+00 =
- Mask: keep the least significant byte of the total =
- Complement: compute ones' complement of least significant byte = 61 (hex).
S00F000068656C6C6F202020202000003C S11F00007C0802A6900100049421FFF07C6C1B787C8C23783C6000003863000026 S11F001C4BFFFFE5398000007D83637880010014382100107C0803A64E800020E9 S111003848656C6C6F20776F726C642E0A0042 S5030003F9 S9030000FC
- Binary-to-text encoding, comparison of various encoding algorithms
- Intel HEX, hex file format by Intel
- TekHex, hex file format by Tektronix
- ^ Tareski, Val. “Motorola S-record description”. www.amelek.gda.pl. 2018年6月26日閲覧。
- ^ a b c d e f g h i j k l “Motorola S-records from Unix man pages.”. 2014年6月30日閲覧。
- ^ a b c Motorola (1992), “Appendix C”, M68000 Family Programmer's Reference Manual (rev. 1 ed.), Motorola (Freescale), pp. C-1–C-5, ISBN 978-0137232895
- ^ “srec_examples”. sourceforge.net. 2020年2月4日閲覧。
- ^ CCS Compiler Reference Manual PCB/PCM/PCH, Custom Computer Services, Inc., (May 2014), p. 107 2015年2月8日閲覧。
- M68HC05EVM Evaluation Module User's Manual (4th ed.), Motorola (Freescale), (1990) Appendix A, "S Record Information", page A-1, states, "For compatibility with teletypewriters, some programs may limit the number of [data] bytes to as few as 28 (56 printable characters in the S-record)."
- M146805EVM Evaluation Module Users Manual (1st ed.), Motorola (Freescale), (1983)
- MCM6830L7 MIKBUG / MINIBUG ROM, Engineering Note 100, Motorola (Freescale), (1975)